Description
Miller 20 Series Constant Speed Wire Feeder
The Miller 20 series constant speed wire feeder is a simple and cost-effective four drive roll wire feeder for industrial manufacturing and fabricating. It can be used in heavy or light duty fabrication shops, automotive production and educational institutions. It has the ability to mate to many of the popular power sources Miller has to offer. Such as: The CP-302, Deltaweld Series, Invision 352 MPa and 450 MPa, XMT 350/450 and Dimension 650 Power source.
| AVAILABLE MODELS | MILLER PART NUMBER |
| Standard Basic 20 Series Model | 301499 |
| Advanced Digital 20 Series Model | 301499001 |
Features:
- Supporting processes – MIG (GMAW), Flux-Cored (FCAW) (Gas and Self Shielded)
- Wire diameter capacity – 0.023 – 5/64″ in. (0.6mm-2.0mm)
- Wide range wire feed speed from 75-750 ipm
- Trigger hold/lock control 2T and 4T
- Four gear-driven drive roll system
- On-board burn-back and motor ramp control
- A durable 16-gauge sheet metal housing
- Two models to choose from: Standard Analog Control and Digital Control System
- Digital meter and remote voltage control are standard on the digital model
- Adjustable run-in control is standard on the digital model
- Net weight is 46lbs (21Kg)
Supporting Power Supplies:
- Miller CP-302
- Miller Deltaweld® Series
- Miller Dimension™ 650
- XMT® 350/450
- Invision™ 352 MPa and 450 MPa
Drive Roll Selection Chart:
| Wire Size | V-Groove | U-Groove | V-Knurled Groove | U-Cogged Groove |
| 0.023″/0.025″ in. (0.6mm) | 087132 | – | – | – |
| 0.030″ in. (0.8mm) | 046780 | – | – | – |
| 0.035″ in. (0.9mm) | 046781 | 044750 | 046792 | – |
| 0.040″ in. (1.0mm) | 191917 | – | – | – |
| 0.045″ in. (1.1/1.2mm) | 046782 | 046785 | 046793 | 083319 |
| 0.052″ in. (1.3/1.4mm) | 046783 | 046786 | 046794 | – |
| 1/16″ in. (1.6mm) | 046784 | 046787 | 046795 | 046800 |
| 0.068″/0.072″ in. (1.8mm) | – | – | – | – |
| 5/64″ in. (2.0mm) | – | 046788 | 046796 | 046801 |
Reviews
There are no reviews yet.